Gloomhaven Character Board (Remix)

prusaprinters

<p>Update May5 2022</p><p>Added the XP and HP pin (heart) stl files from <a href="https://www.thingiverse.com/DocKuro">DocKuro</a>'s post just in case people cant find them.</p><p>Also fixed errors in the Character Board stl and the gcode files.</p><p>I use Duramic PLA+ Filaments and they print very well with PrusaSlicer's Generic PLA Profile which is what I used for the supplied gcode file.&nbsp;</p><p>---------------------------------------</p><p>I have merged DocKuro's "Gloomhaven compact dashboard with trackers" and ditography's "Gloomhaven Player Dashboard variant" to have both the XP/HP lovely trackers and the long inventory cards slot on the back.</p><p>I have printed the model with sliver and black filaments (swapped the sliver to black for layer heights 9.2-11.2). This way, I got a nice color contrast which is easier on the eyes :)</p><p>Additionally, the entire model was printed in 0.2 resolution except for the black filament, where I have used 0.1. That part is not a must, but it did not add a long print time, so I went ahead with it. To do that, you will need to right click on the model in the 3D Editor view (Tab key shortcut) and select Height Range Modifier (start range 9.2, Stop Range 11.2, Layer Height 0.1 then press Slice).</p><p>The only downside (for me at least) was the overhang that creates the space for the character cardboard (goes under the tray to display the Scoundrel. Therefore, minor supports have been used, but by no means do you have to use supports.</p><p>I ended up not using supports on 3 of my models with minimal difference (photos included), and it turned to have some loose filament strings on the bottom, but it does not bother me, and I like the overall setup). YMMV :)</p><p>Thingiverse Remix settings wouldn't let me use the original posts, so here are their links<br>https://www.thingiverse.com/thing:3625850<br>https://www.thingiverse.com/thing:3474938</p>