Glasses holder

prusaprinters

<p>This is a holder for your glasses which you can put next to your bed to keep everything nice and organized :)</p> <p>this model consists of 3 parts, the base and 2 different trays. (you can choose the combination of trays but i suggest you put the big one on the bottom an the small one on top).</p> <p>these can be printed in PLA, ASA, PETG,.. any color u like :)</p> <h3>Print instructions</h3><p>All modifier meshes are included an can be used in prusa slicer.</p> <p><strong>Printing the Base:</strong></p> <p>you can use the modifier "MOD_BASE" to make tho bottom half a bit heavier by adding more infill. i used 15 % overall an about 30% for the bottom half at 0.2mm layer height.</p> <p>its important to print it in the orientations as shown in the pictures.</p> <p><strong>printing trays:</strong></p> <p>These you can print in the normal orientation. You can add the modifier meshes and make te bottom and top solid layers 0 so you can see the infill. you can change the infill type en percentage as you like! Use the option "support from build plate only".</p> <p>once you printed everything you can use a bit of glue to attach the trays to the base.</p>