Glasses_Adapters_for_Full_Facepieces

thingiverse

这是适配全面罩防毒面具的两种眼镜架设计，可适配如3M 6800、霍尼韦尔54001、思创S100系列，只有一个镜片的全面罩防毒面具。 应当与大部分全面罩防毒面具适配，但是和有左右双目镜片的面具适配不佳，更基本地，需要防毒面具内部空间放得下你的眼镜。 These are two designs of glasses adapters for full facepiece/gas mask such as 3M 6800 or Honeywell 54001, which features a single lens. Should be able to work with the majority of full facepieces, but not with facepieces with two lens, or more basically, lacks internal space to let your glasses fit in. 文件中的臂和短臂可按需选择，其他文件基本都会用到。 对我来说，我使用的是卡槽版本，配两个短臂。如果你需要，可以选择一个臂和一个短臂，仅一个短臂，或任何能配合你所用面罩的组合。 我用的是一副旧眼镜，因为眼镜腿要拆掉，你可以也用旧眼镜或者买一副便宜眼镜。 The arms and short arms in the file can be chosen to suit your need, but other STLs basically all need to be used. For my use case, I use the slot version with two short arms. If you need, you can select one arm and one short arm, only one short arm, or any combination that works with your gasmask. I use a pair of old glasses, since the legs of glasses need to be removed, you may use an old pair or buy a cheap pair of glasses for the build. 对于卡槽版本，你需要N+1个M3*12螺丝（N是你选用的延长臂数量）和螺母，杯头盘头都可以。还要一根扎带来固定眼镜，双面胶来固定slot piece和arm base，两个直径8mm 高度2mm的圆柱形磁铁，一些纳米胶来把整个支架粘在面罩镜片上（宽度20mm或15mm皆可）。 For the slot version, you'll need N+1 M3*12 bolts(N is the quantity of arms you use) and nuts, SHCS or BHCS are all fine. And a ziptie to mount your glasses to the claw, normal double sided tape to mount slot piece with arm base, two cylindrical magnets(8mm in diameter and 2mm in height), some VHB tape to mount the whole adapter to your gasmask(20mm or 15mm in width). 关于打印件，你需要： As to prints, you'll need Claw_for_Glasses*1, Arm_Base*1, Slot_Base*1, Slot_Piece*1, and arms, type and quantity based on you requirement. 对于磁吸版本，你需要N+1个M3*12螺丝（N是你选用的延长臂数量）、两个M3*22螺丝和螺母，杯头盘头都可以。还要一根扎带来固定眼镜，四个直径12mm高度8mm的圆柱形磁铁， 一些带胶防滑垫来防止支架发生位移。 For the magnet version(yes I know slot version also features magnets), you'll need N+1 M3*12 bolts(N is the quantity of arms you use), two M3*22 bolts and nuts, SHCS or BHCS are all fine. A ziptie to mount your glasses to the claw, four cylindrical magnets(12mm in diameter and 8mm in height), some elastic pads with double sided tape to prevent movement of adapter and glasses after installing adapter to your gasmask. 关于打印件，你需要： As to prints, you'll need Claw_for_Glasses*1, Holder_to_Arm*1, Inner_Magnet_Holder*2, Outer_Magnet_Holder*2, and arms, type and quantity based on you requirement. 可能需要强力胶来固定磁铁。为了螺丝孔的强度，你可以在切片时将螺丝方向调为垂直于热床。 Superglue maybe needed to secure magnets. You may orient the parts to make screw direction vertical to hot bed when slicing in order to get good strength around the screw holes. 如果你愿意，可以来B站看看我的演示视频，也可以加QQ群来交流。 And if you wish, you may come to visit my bilibili account(https://space.bilibili.com/19093773) for demonstration videos or join my QQ group(850474972) to communicate or have some chats.