GIRO - Titan Extruder Bracket

prusaprinters

<h4>GIRO - Titan Extruder Bracket</h4><h4>General</h4><p>This Titan Extruder Bracket is inspired by the design of <a href="https://www.thingiverse.com/thing:2848747">Navame</a>. I wanted to make it fit and look better on my printer and created a similiar bracket for the Titan. These brackets does fit for the TEVO Titan Extruder and the Trianglelab Titan Extruder.</p><p>There are two versions available for the Titan Extruder. The first version has a middle mounting option. The second version has a side mounting.</p><p>These brackets are designed to be mounted on a 40x20 or 40x40 aluminium extrusion profile.</p><h4>Printing</h4><p>Print this bracket with a lower speed, for example 45 mm/s, to get a more accurate printing. Also print with 100% infill to get maximum strengthness of your bracket. You might need the support structures for the center hole where the shaft of the stepper motor will be pushed through.</p><h4>Additional Information</h4><p>Let me know if there are any kind of problems with these brackets. I will try to help and if neccessary correct the designs. I appreciate any kind of feedback to these brackets.</p><p>If you like my work and find it really usefull then I would be very happy if you give me a small tip as an appreciation for my work.</p><figure class="image image_resized" style="width:75%;"><img src="https://media.prusaprinters.org/media/prints/145660/rich_content/09d62f0a-4088-4b54-82d1-2e73dac12342/thankyou_2png.png#%7B%22uuid%22%3A%221078c63d-a8bf-4bc8-99e9-74812e4478c9%22%2C%22w%22%3A640%2C%22h%22%3A77%7D"></figure>