GIRO - TEVO Tarantula Heatbed Holder

prusaprinters

<h4>GIRO - TEVO Tarantula Heatbed Holder</h4><h4>General</h4><p>This heatbed holder was designed to manually move the heatbed across the Y-Axis. It should prevent to touch a hot heatbed by accident or to prevent that you have to touch the printsurface after cleaning the print surface. If you touch the heatbed at its sides where the springs are mounted then it can relocate the heatbed. In that case it's neccessary to readjust the printbed. With the heatbed holder you are able to avoid all these problems.</p><h4>Printing</h4><p>I would recommend to use at least 3 perimeters. Print with a lower speed, for example 30 mm/s, to get a more accurate printing. I recommend to print the holder with a maximum of 30% infill to avoid that the heatbed holder gets too heavy and cause vibrations while printing.</p><h4>Additional Information</h4><p>Let me know if there are any kind of problems with the holder. I will try to help and if neccessary correct the designs. I appreciate any kind of feedback to the holder.</p><p>If you like my work and find it really usefull then I would be very happy if you give me a small tip as an appreciation for my work.&nbsp;</p><figure class="image image_resized" style="width:75%;"><img src="https://media.prusaprinters.org/media/prints/145653/rich_content/e8fee883-9e60-451e-b6be-d9229021d7d5/thankyou_2png.png#%7B%22uuid%22%3A%226db2efd5-bb38-4da3-a0cd-d13ef0b83c66%22%2C%22w%22%3A640%2C%22h%22%3A77%7D"></figure>