GIRO - TEVO Tarantula / 608 Ball Bearing Y-Axis Idler

thingiverse

#### GIRO - 608 Ball Bearing Y-Axis Idler #### #### General #### This idler was designed for the TEVO Tarantula's Y-Axis and utilizes 608 ball bearings. It is also compatible with other printers having a 4020 extrusion profile as an axis. If there are other printers where this idler works, please let me know. This Idler can be used with either the stock Y-Axis carriage or carriages by Mackers, Taralu, or other manufacturers. This Y-Axis idler is an addition to my designed 626 ball bearing X-Axis idler, called [GIRO - TEVO Tarantula / 626 Ball Bearing X-Axis Idler]. You will need additional screws, nuts, and washers for the mounting of the idler. The necessary parts are listed below. **Additional screws, nuts, and washers** 2x M3x35 4x M3 Washer 2x M3 Nut 6x M4x10 screw 12x M4 Washer 1x M5x35 2x M5 Washers 1x M5 Nut 2x 626 Ball Bearing #### Printing #### I recommend printing the idler with 2 or more perimeters. A lower speed, such as 30 mm/s, will result in a more accurate print. I suggest printing the idler with at least 50% Infill for the bracket and 100% infill for the pulley and pulley insertion. #### Additional Information #### If there are any issues with the idler, please let me know so that I can help and make necessary corrections if needed. Any feedback on this idler is greatly appreciated. If you find my work helpful and would like to show your appreciation, a small tip is more than welcome. To all those who have supported me, thank you!  [GIRO - TEVO Tarantula / 626 Ball Bearing X-Axis Idler]: https://www.thingiverse.com/thing:3432676