GIRO.remix - X-Axis Idler

prusaprinters

GIRO - X-Axis IdlerGeneralThis X-Axis idler is inspired by the design of bdwalker1. I wanted to make it fit better on my printer and remixed this idler into a screwable version. The X-Axis idler needs two M4 screws to be mounted correctly and stiff on the X-Axis aluminium profile.I also increased the length of the insert so it has a longer lever arm to withstand the torque which is created by the stepper motor a bit better.This bracket is designed to be mounted on a 20x20 aluminium profile or 40x20 aluminium profile.PrintingPrint this bracket with a lower speed, for example 45 mm/s, to get a more accurate printing. Also print with 100% infill to get maximum strengthness of your bracket. You need support structures for the insertions. So supports from ground plate only should be enough.Additional InformationLet me know if there are any kind of problems with this idler. I will try to help and if neccessary correct the design. I appreciate any kind of feedback to this idler.If you like my work and find it really usefull then I would be very happy if you give me a small tip as an appreciation for my work.