GIRO.remix - OctoPrint Raspberry Pi Camera Mount

thingiverse

####GIRO.remix - OctoPrint Raspberry Pi Camera Mount#### ####General#### This is a remix of [parkis][]'s nicely designed [Raspberry Pi Camera Mount][] for the Prusa i3. I nearly completely redesigned it to make it fit on my 3D printer with a different camera. The enclosure for the Raspberry Pi Camera was adjusted to make it fit for the OV5647 Model G Camera by Waveshare and is also available by SainSmart. You can grab it at one of the following links. *Those links are just for reference and they might change over time, so make sure you get the correct camera if you want to use this mounting.* **Germany** [OV5647 Model G by SainSmart (Amazon_DE)][] [OV5647 Model G by Waveshare (Amazon_DE)][] [OV5647 Model G by Waveshare (Official Waveshare Reseller - Eckstein Komponente Shop)][] **United States** [OV5647 Model G by SainSmart (Amazon_US)][] [OV5647 Model G by Waveshare (Amazon_US)][] ####Printing#### I would highly recommend printing with exactly 2 perimeters because some areas won't get really solid otherwise. Print with a lower speed, for example 30 mm/s, to get a more accurate printing. I recommend printing the enclosure with a 100% infill to get the most solid printing. The STL-file **GIRO.remix_PiCam_Z-Rotary.stl** must be paused after 5mm of printing and a nut (Size M4) must be placed into the hole with the hexagonic structure, or you might not mount the camera on your printer! ####Additional Information#### Let me know if there are any kind of problems with the Raspberry Pi camera mount. I will try to help and correct the designs if necessary. I appreciate any kind of feedback to these mountings. If you like my work and find it really useful, I would be very happy if you give me a small tip as an appreciation for my work. For all of you who gave me a tip, thank you! [Raspberry Pi Camera Mount]: https://www.thingiverse.com/thing:1579789 [parkis']: https://www.thingiverse.com/parkis/about