GIRO.remix - Dual Y-Axis Bracket

prusaprinters

<h4>GIRO - Dual Y-Axis Bracket</h4><h4>General</h4><p>This design was inspired by <a href="https://www.thingiverse.com/thing:1933208">colindo</a>. In my opinion the original design did the job but it wasn't really stiff so I decided to remix it and make my own design. It's stiffer and also has an automatic locking for the aluminium profiles to keep them at a desired place. Be sure to print this with a well calibrated printer because the little nose at the end of the bracket holds the aluminium profile in place. It might me very tight if you haven't got a well calibrated printer. In my case my printer differed from the 20mm gap by 0.06mm. In that case the nose really created some tension to the aluminium bracket.</p><h4>Printing</h4><p>Print this bracket with a lower speed, for example 35 mm/s, to get a more accurate printing. I suggest to print it with a minimum infill percentage of 50% but I always print those kind brackets with an infill of 100% because I want the maximum durability. You don't need support structures to print this bracket.</p><h4>Additional Information</h4><p>Let me know if there are any kind of problems with this bracket. I will try to help and if neccessary correct the design. I appreciate any kind of feedback to this bracket.</p><p>If you like my work and find it really usefull then I would be very happy if you give me a small tip as an appreciation for my work.</p><figure class="image image_resized" style="width:75%;"><img src="https://media.prusaprinters.org/media/prints/145656/rich_content/1874c39b-6aa4-4c70-9dbf-ffde997a0a8a/thankyou_2png.png#%7B%22uuid%22%3A%22cc9f48b9-ca52-4239-ae08-b781b42c0c8f%22%2C%22w%22%3A640%2C%22h%22%3A77%7D"></figure>