GIRO.HUE - Motion Sensor Wall Mount
prusaprinters
GIRO.HUE - Motion Sensor Wall MountGeneralThis bracket was designed to be mounted with the original magnet and screw provided by Philips. The wall mount can be rotated by the middle section and the arm can be adjusted lineary due to a single axis rotation ensured by the additional M3 screw.Additional screws, nuts and washers per bracket1x M3x16 Socket Screw1x M3 Nut1x Wall Screw (Anchor + screw or regular wood screw, depends on wall or use double sided adhesive)PrintingI would recommend to use 3 or more perimeters. Print with a lower speed, for example 40 mm/s, to get a more accurate printing. I recommend to print the bracket with at least 50% Infill.Firmware adjustmentsNo Firmware Adjustments needed.Additional InformationLet me know if there are any kind of problems with the wall mount. I will try to help and if neccessary correct the design. I appreciate any kind of feedback to this bracket.If you like my work and find it really usefull then I would be very happy if you give me a small tip as an appreciation for my work.
With this file you will be able to print GIRO.HUE - Motion Sensor Wall Mount with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on GIRO.HUE - Motion Sensor Wall Mount.