GIRO.ETS - 5015 Radial Fan Bracket

prusaprinters

<h4>GIRO.ETS - 5015 Radial Fan Bracket</h4><h4>General</h4><p>This bracket was designed to be mounted on the 2020 aluminium extrusion profile over the printed circuit board (PCB) of the Eryone Thinker S and should be used to cool down the TMC2208 stepper drivers of the Eryone Thinker S. This bracket was created to be mounted with a 5015 radial fan. The radial fan may be rotated along the rotation axis and helps to correctly adjust the fan on the stepper drivers.</p><p>You will need additional screws, nuts and washers for the mounting of bracket. The needed parts are mentioned below.</p><p><strong>Additional screws, nuts and washers per bracket</strong></p><ul><li>1x M4x10</li><li>1x M4x25</li><li>1x M4x20**<strong>or</strong>** M4x25 (with reduced adjustment along the rotation axis)</li><li>2x M4 Washer</li><li>1x M4 Locknut</li></ul><h4>Printing</h4><p>I would recommend to use 2 or more perimeters. Print with a lower speed, for example 40 mm/s, to get a more accurate printing. I recommend to print the bracket with at least 50% infill.</p><h4>Additional Information</h4><p>Let me know if there are any kind of problems with the bracket. I will try to help and if neccessary correct the design. I appreciate any kind of feedback to this bracket.</p><p>If you like my work and find it really usefull then I would be very happy if you give me a small tip as an appreciation for my work.</p><figure class="image image_resized" style="width:75%;"><img src="https://media.prusaprinters.org/media/prints/145645/rich_content/bbb7c333-51d4-40d5-b8ec-b18f0c69e93f/thankyou_2png.png#%7B%22uuid%22%3A%223b3b2061-a266-467b-a66a-78013f93879d%22%2C%22w%22%3A640%2C%22h%22%3A77%7D"></figure>