Girl Desk Clock

prusaprinters

Girl Desk Clock with CalendarA simple 3D Printable clock with calendar. A generic clock movement machine is used for displaying time. The date and month can be changed manually. Each date/month block has a magnet inside it which is need to be placed inside while printing. There is a tray behind the clock for placing these blocks at reserve.Note: Please read Instructions before printing…Recommended Print SettingsNozzle   : 0.4mmMaterial   : PLAColor    : AnyLayer Height   : 0.2mmSupports  : NoneRafts    : NonePrint Time :  ~13 Hr. (Estimated)Hardware RequirementsClock movement machine (Check dimensions)Neodymium magnets 10mm x 1mm (Diameter x Height)Glue (For Printed Parts)InstructionsDate.stl, Month.stl : Print in 2 colors (use M600 in GCode or Add Color Change (Filament Change) option in Prusaslicer before printing layers for numbers and letters (date, month)(Layer 9 for 0.2mm). Similarly for the clock face )Since these blocks uses neodymium magnets, which is to be inserted to the prints midway, Use Pause print feature (M601) to pause the print at appropriate layer(Layer 7 for 0.2mm) and place the magnets carefully without misaligning the carriageClock_Face.stl : Also print in two colors. Here magnets can be just glued after printing.Clock_Machine_Holder_Optional.stl : Only print if the clock machine tends to rotate on its axis after fitting. Mostly not needed. Also a simple Double Sided Tape will solve the issue. (If this is required, the holder should be glued to the back of the clock face aligned with machine)Please cross check everything thoroughly before executing print. Don't forget to verify MAGNET POLARITY.