Gift Box For The 3D Printed Watch created Printschnitzel.at

prusaprinters

<p>A presentation box to complement the watch created by Printschnitzel.at (see link below) as previewed in the Prusa weekly print 91 article. The box is perfect for presenting the watch for such occasions as a birthday, retirement or a Father's day gift.</p><p>The box has been designed to fit all watch band size lengths, which Printschnitzel.at has uploaded, allowing for sufficient clearance around the watch when the box is closed.</p><p><a href="https://www.printables.com/model/8557-3d-printed-watch/files">https://www.printables.com/model/8557-3d-printed-watch/files</a></p><p><strong>Printing Information</strong></p><p><strong>Watch box - Lower:</strong></p><p>Print the lower box with the base of the box mating the build plate.</p><ul><li>0.15mm layer height.</li><li>15% infill.</li><li>0.4mm nozzle diameter.</li><li>Prusament PLA used.</li><li>Support material from the plate is required for the latch feature.</li></ul><p><strong>Watch box - Upper:</strong></p><p>For the best resolution quality. Print the upper box with the box opening mating the build plate.</p><ul><li>0.15mm layer height.</li><li>15% infill.</li><li>0.4mm nozzle diameter.</li><li>Prusament PLA used.</li><li>Support material from the plate.</li></ul><p><strong>Watch box - Latch:</strong></p><p>The latch can be sometimes problematic to print. To achieve the best fit when fully assembled. A STEP file is available to allow for some minor editing in the length of the latch if needed.</p><ul><li>0.15mm layer height</li><li>15% infill</li><li>0.4mm nozzle diameter</li><li>Prusament PLA</li><li>Support material (optional).</li></ul><p><strong>Watch box - Band Holder:</strong></p><p>There are various band holder files available. The band length range sizes stated on the files are as a guide only and have been estimated. If the fitment is too loose or too tight, use either the next size up or down accordingly.</p><ul><li>0.15mm layer height</li><li>15% infill</li><li>0.4mm nozzle diameter</li><li>Prusament PLA</li><li>No Support material.</li></ul><p><strong>Assembly information:</strong></p><p>All parts push and click together. The box lid hinge will need a little pressure to be located into the mating hinge in the lower box. As highlighted above, the latch may need some editing to achieve the ideal fitment. However, the STL file attached was a good fit for the example in the photos.</p><p>Happy printing…..</p><p>&nbsp;</p>