Ghostbusters Proton Wand with Pop & Twist MK2.1 Printed, PVC, or Metal

thingiverse

Remix of several parts of the Q-Pack Wand to allow for pop action with grip twist around a Printed, PVC, or Metal inner support tube. Download all files. The files are numbered. Parts noted ALL are required for all versions and should be printed at 100% infill. You do not need to print all of the parts listed. Print one of each number and at each duplicate number choose the variation for your build. Meaning if there are three 01-pop latch files, choose the one best suited for your build according to the file name. Parts are noted for the PVC, Printed, or Metal variations. Additionally some parts have versions based on your preference. The red parts (if photos are present) are printed with 100% infill, the rest is at 15% .15mm layer height. Required Materials: M3x30mm screw (barrel to main #1 screw/spring attachment/pop guide) M3x6-10mm screw (Barrel to main #2 screw/pop guide) M3x10-25mm screw (latch set screw) M3x6-10mm screw (latch spring screw) 1/8" OD steel or brass rod (pop lever) MISC springs (qty 2 to 4) from a hardware store. 20mm-22mm OD clear acrylic tube about 140mm (inner diameter can vary, I used 20/16mm OD/ID and later upgraded to the GBFans tube and metal hybrid option) You'll need to cut the clear tube to your preference. Far too many variations for me to adapt. I tried to at least allow for the larger tube sold by GBFans. 136mm seems to work well and is the length I've been using. *Metal parts specific materials listed at the end.* Printed Version Parts list: Outer Barrel: Printed part Inner Barrel: Printed part @ 100% infill Pop Tube: Printed Part PVC Version Parts List: The PVC version replaces the printed main tube with a stronger PVC part but uses the same outer tube with ears. Outer Barrel: Printed part Inner Barrel: 3/4" PVC tube approx 200mm Length Pop Tube: Printed Part Metal Version Parts List: For this I recommend a metal rear handle and a metal front main tube/inner barrel. The remaining parts can be printed. Metal Hybrid (Recommended version) Outer Barrel: Printed Part Inner Barrel: 1.125" OD / 1.027" ID / 0.049" wall aluminum tube - 200mm Length Pop Tube: Printed part @ 100% infill Rear Handle: 1.25" OD / 1.134" ID / 0.058" wall aluminum tube- 235mm length Body to main tube: "METAL v1" Metal Complete: Outer Barrel: 1.25" OD / 1.134" ID / 0.058" wall aluminum tube - 146mm Length (you will need to source the wand ears and weld them) Inner Barrel: 1.125" OD / 1.027" ID / 0.049" wall aluminum tube - 200mm Length Pop Tube: 1" OD / 0.902" ID / 0.049" wall or another 1" OD tube that has an ID to match your clear barrel. Rear Handle: 1.25" OD / 1.134" ID / 0.058" wall aluminum tube- 235mm length Body to main tube: "METAL v2" plus 3x M3x6mm screws and 1.25" tube - 42mm length Metal Parts List Breakdown: Outer Barrel: 1.25" (31.75mm) OD / 1.134" ID / 0.058" wall - 146mm Length Rear Handle: 1.25" (31.75mm) OD / 1.134" ID / 0.058" wall - 235mm length Coupler/Body to main tube: 1.25" (31.75mm) OD / 1.134" ID / 0.058" wall - 42mm length Inner Barrel: 1.125" (28.58mm) OD / 1.027" ID / 0.049" wall - 204mm length Pop Tube: 1" (25.4mm)OD / 0.902" ID / 0.049" wall or another 1" OD tube that has an ID to match your clear barrel. - 210mm length 1"Pop tube options: 0.93" ID /0.035" wall 0.902" ID /0.049" wall 0.884" ID /0.058" wall Remixed from https://www.thingiverse.com/thing:4621554 for questions please ask here: https://www.facebook.com/groups/3DprintedGBprops