Ghostbusters Proton Pack Loom Clamp

thingiverse

Printable loom clamp designed specifically for Proton Packs. To use, cut a U-Shape into one of your cyclotron slats and drill two holes in your motherboard. Compatible only with 3/4" ID Split or Splitless loom configurations. As with any clamp design, split may not function optimally. However, I've found that splitless works best for my pack. The included PDF template provides a step-by-step guide for drilling and cutting the loom clamp. Simply line up the template on your motherboard, secure it with tape, and use a centerpunch to mark the screw holes. Use the second template to mark your cyclotron for cutting; a Dremel or similar tool will make quick work of this task. The loom clamp closes securely using M4x20mm socket head cap screws. Mounting the clamp to the motherboard is done via two M6 screws, up to 5mm thicker than your pack's motherboard. For added stability, use M4x15mm screws on the clamp and mark/drill those holes from the template onto your motherboard. Securing the clamp with M4x8mm screws from the back is also an option, but it should not be necessary.