(German) Laser-Flashlight-mount for the no-crossbow Adderini

cults3d

Disclaimer: I am no lawyer. So print, mount and use at own risk ! I combined my flashlight mount with a simple mount for standard laser pointers with an outer diameter of 15 mm like this Laser module from Amazon for 20€: https://www.amazon.de/dp/B0081S10SY/ It fits the 50 mm mounting holes of the cocking lever of the Adderini and allows using both a laser sight as well as a flashlight. Since it does not use the Picatinny rail this adapter should be legal in Germany for the No Crossbow Adderini which technically is a bow. This combination eliminates the danger of watching into the Laser beam when cocking the Adderini since the beam is blocked by the magazine. For mounting simply put the laser pointer and an M3 nut into the swivel part of the adapter. Then simply mount it into the adapter screwed to the Adderini and screw a long M3 screw through both parts. The screw serves as well as axle as keeping the Laser pointer into position. The rotation provided for the laser adapter should be enouh for the standard ranges of the Adderini (10-15 m max). Edit: Updated the design a bit on request to accept 19 mm lasers as well. This should fit those other green laser modules which are sold for Stinger crossbows for example. Also included is the OpenSCAD file used for the adapter. You can simply adjust the diameter for your laser in the last line: translate ([0,40,7]) rotate ([0,90,0]) laser_swivel_mount(laser_dia=15); Here the diameter is 15 mm. I guess this is pretty obvious :-)