GEPRC LX5 LSX5 Leopard FPV Camera and GoPro Session 5 Protector

thingiverse

This camera protector for the GEPRC LX5/LSX5 Leopard and accompanying GoPro mount is somewhat of a patchwork. If you do not require the GoPro mount, I recommend using the item by Zytra, as it was my source of inspiration and validation for measurements. Things exist that integrate the GoPro mount and camera protector into one unit, but I wanted to be able to use different materials for each part, swap different angles individually if desired, and maintain strength. This design attaches the GoPro mount fully to the top standoff and places the FPV camera protector on top of or outside the GoPro mount. It assembles securely to my satisfaction. You will need an additional 20mm round standoff for the rear of the GoPro mount. To make swapping the GoPro in and out easy, I added slots for securing the front of the mount with zip ties. Otherwise, it is a challenge to insert or remove. The camera protector works best with the [side plates](https://www.thingiverse.com/thing:2557584) that I remixed. I used several items as inspiration and measurement validation, but all objects were built from scratch. A key piece that aided me was the Fusion360 source file linked by joem_ in his Session mount thing. This provided an accurate model of the metal pod for the LX5 to build from. Credits: [GEPRC GEP-LX5 Leopard GoPro Session AND Runcam 3 mount (Works with LX4 LX6 LXS) by joem_](https://www.thingiverse.com/thing:2345767) [GEPRC LX5 "Leopard" FPV Camera Protector/Mount by Zytra](https://www.thingiverse.com/thing:2337172) [GoPro Session Protector / Cover with Strap Slots by Airmaxx23](https://www.thingiverse.com/thing:2112212) I have included the Sketchup file for anyone who wishes to modify this further. ###Settings Printer: Qidi Tech 1 V2 ###FPV Protector Settings Material: ABS Supports: Yes - I manually placed supports in Simplify 3D in all holes Rafts: No Resolution: .2mm Infill: 50% Perimeters: 4 Bottom Layers: 3 Top Layers: 3 Orientation: Print on its side ###GoPro Camera Protector Material: Sainsmart TPU Supports: Yes - I manually placed supports in all holes around the camera. I did not use supports in the standoff holes Rafts: No Resolution: .2mm Infill: 50% Perimeters: 2 Bottom Layers: 3 Top Layers: 3 Orientation: Print on its back (should load in the correct orientation)