Geometric Sculpture #06

prusaprinters

Object description:Geometric sculpture no. 06.Print the parts in the suggested direction. If required, paint on support is already defined.The parts can be simply plugged together. Glue is not required but can be used. Number of parts to be printed:1x Sculpture-#06-curve_bottom2x Sculpture-#06-curve3x Sculpture-#06-curve_mirrored1x one of the different base typesIf you choose one of the versions with the bore hole, you need a pin of dia. 8mm. 53mm long for the square base and 70mm long for the triangle base.The mounting hole in the curve part will not be perfectly round. I therefore recommend carefully reworking the hole by hand with a drill.In addition, stands with different pin diameters from 8.0 to 7.7 mm are now available. For a perfect fit, I recommend a small test print of the pin before printing the complete stand. Links to the other sculptures of this series:Geometric Sculpture #01:LinkGeometric Sculpture #02:LinkGeometric Sculpture #03:LinkGeometric Sculpture #04:LinkGeometric Sculpture #05:LinkGeometric Sculpture #07:LinkGeometric Sculpture #08:LinkGeometric Sculpture #09:LinkGeometric Sculpture #10:LinkGeometric Sculpture #11:LinkGeometric Sculpture #12:Linkmore will follow… … Update 2024-08-21:Crosslinks to sculpture #11 and #12 added. Recommended print settings:Material:  PLA, ASA/ABS, PETG.Resolution: 0,2mmInfill: 5%Perimeter: 2Support: already included where required