Genshin Impact - Xiphos Moonlight

cults3d

This model is cut into 14 pieces to fit in my Ender 3 with platform size of 200mm x 200mm x 200mm. All the pieces come with flat face that can lay on the printing bed easily. There is tunnel punch on the model for alignment and bone installation purpose. You can find the pieces you want to print easily by referring to the picture of pieces with their file name labelled on it in the preview section. Just in case you need the uncut version, it is included as well. The total length of this model fall around 1100mm, therefore you can skip using bone. However, if you wish to use bone in it, the diameter of the tunnel is 10mm. You can use anything between 7mm to 10mm as bone or alignment. If you can't find anything to help you with, you can use the included "peg" file which is a cylinder with diameter of 9.5mm. If you are not good in removing those support on the tunnel, you can choose to use those as guide and drill your own tunnel on the pieces. Once printed pieces a and b, glue them together using super glue or other suitable adhesive to form a part. Repeat the same for all the pairs and join all the parts afterward. For scaling please, use the same scale for all the pieces. Cheers and Happy Printing!