Genshin Impact - Vortex Vanquisher

cults3d

This model is separate into Pummel and Spearhead. They are cut into total of 12 pieces to fit in my Ender 3, platform size of 200mm x 200mm x 200mm. I also include the uncut version, just in case you want to cut it yourself. I add in extra part which is "pole" as well just in case you can't find material to connect the pummel and the spearhead. In this design, I retain most of the edges solid, giving more threshold for post-process work. In this design, I opt out those pattern, as they are too close together. I did some test print and it is not ideal to present them in 3D print. Therefore I suggest drawing the pattern on the spearhead and pole with sharpie or paint. It is cut into pieces for easy printing in mind, with large flat surface that can lay on the bed easily and no support needed on the main shape. However, support is needed on the tunnel for adding bone that punch through the prop. The diameter of the tunnel is 10mm after you combine the pieces, a and b together. You can add in a metal rod with diameter up to 10mm as a bone. If the diameter of the rod is less than 7mm, I strongly suggest to pump in some hot glue to hold the rod in position. You can easily find the piece you want to print with the picture I attached. I did label all the pieces with their corresponding file name. If you need housing with different diameter, just inbox me in Twitter, I will customize it for you. I will suggest, using bones between connection of the pieces as the spearhead is quite wide in size. You can do that by drilling holes between the connecting faces and use a metal or wooden rod to bridge them together. For scaling, please scale all the part with the same scale factor and axis so that it can be combine perfectly once printed out. Cheers! Hope you guys like it.