Genshin Impact - The Catch

cults3d

This model is separated into two parts spearhead and pummel. For spearhead and pummel, it is cut into 8 pieces and 4 pieces respectively to fit in Ender 3 with 200mm x 200m x 200mm platform. I do include a picture with file names label on it. Hope this can help you find the part you want to print easily. I also include a un-cut version just in case you want to cut it yourself. All the pieces come with a flat surface that can lay on the bed easily. However, there are some hanging parts which can't be avoided located at P2a, P2b, 2a, and 2b. Please be extra cautious when removing the support as the hanging part is quite thin. For pieces 3a, 3b, 4a, and 4b, they are in separated form. I will suggest you to print it in an order so that you wont confuse which pieces to connect with. After print out the pieces a and b, glue them back to back with super glue to form a part. If you need a stronger bond, you can drill couple of holes on the connecting surfaces and bridge them with a small rod. For the pole, I did include a dedicated file name "pole", you can print it upward to avoid using any support. You can print multiple pieces to achieve your desired length. There is a tunnel with 10mm diameter punch through, you can insert a metal or wooden rod with diameter up to 10mm to strengthen the prop. If the rod you use is less than 7mm, you may want to pump in some hot glue to hold the rod in position. For scaling, please use the same scale factor for all the pieces. Cheers and Happy printing!