Genshin Impact - Rainslasher

cults3d

This model is cut into 26 pieces to fit in to my Ender 3 with platform size of 200mm x 200mm x 200mm. All the pieces come with flat face that can lay on the printing bed easily. You can print it in a horizontal position to minimize the number of support use but there will be more "staircase" artifact on the surface. It can be easily fix or minimize by sanding and filler in post process. If you want to minimize those artifacts, you can print it upward but will need ton of support and time to print it. There is a picture with all the pieces labelled to their file names respectively in the preview section. You can refer to that picture to get the pieces you want to print and for assemble purpose. There is an uncut version included as well just in case you need it. The tunnel that punch through the model is with 10mm diameter. You can use it for alignment and bone installation purpose. Once printed, glue pieces a and b together using superglue or any other suitable adhesive to form a part. Repeat the same for the other pairs and join them together after that. For scaling, please use the same scale factor for all the pieces. Cheers and Happy Printing!