Genshin Impact - Eremite Galehunter Longbow

cults3d

This model is designed for Eremite Galehunter cosplay from Genshin Impact. It is not an easy print, please think twice before printing. The bow is cut into 10 pieces to fit in printer size with platform size of 200mm x 200mm x 200mm. There is a picture of parts labelled to their file name in the preview section where you can refer to. I include some picture of parts orientation on printing bed with minimum support used in the preview section for your reference too. I choose not to further cut into half as usual because the thickness of the parts varies throughout the model. Further cutting will make some part too thin to be print. There is 10mm tunnel punch on the model for alignment and bone installation purpose. If removing support from the tunnel is difficult, I suggest using those tunnel as guide to drill your own. I do include a "peg" file as well just in case you need some thing to help you with the alignment. It is a cylinder with 9.5mm diameter. For scaling, please use the same scale factor for all the parts. Cheers and Happy Printing!