Genshin Impact - Akuoumaru

cults3d

This model is cut into 22 pieces to fit in my Ender 3 with platform size of 200mm x 200mm x 200mm. All the pieces come with flat face that can lay on the printing bed easily. However, if you want to reduce the amount of "staircase" artifacts on the surface, you can print it upward but will need ton of support and longer printing time. You can refer to the picture in the preview section with pieces labelled to their file name respectively. I do include an uncut version as well just in case you want to cut it yourself. There are tunnels of 5mm and 10mm diameter punch on the model for bone installation and alignment purpose. If you are not good in removing support, you can use those tunnels as guide and drill your own tunnel. You can also print the "peg" file included if can't find anything that will fit the tunnel in alignment. "peg" is a cylinder with 9.5mm diameter while "peg4.5" is 4.5mm. Once printed, glue piece a and b back to back using superglue to form a part. Repeat the same for the other pairs and join them together after that. For scale, please use the same scale factor for all the pieces. Cheers and Happy Printing!