Generic bike flashlight mount

prusaprinters

<p>For tubular flashlights with 20mm diameter tube(for example Olight S20 baton).</p> <p>For this mount you need:</p> <p>-1 x TPU mount part</p> <p>-2 x PLA support parts</p> <p>-2 x 20mm M3 bolts</p> <p>-2 x M3 nylock nuts</p> <p>Mounting point to handlebar with 25mm / 1" tube with 20mm long M3 bolts and nylock nuts. Nylock nuts recommended as they don't roll open in continued vibration.</p> <p>Mount is designed to be printed in TPU / other flex material, could work in simple PLA, but i doubt that. Print the fastener/support bits in PLA/ABS/PETG or something similar that can withstand some forces. All major stress goes to TPU part.</p> <p>Print with supports and 85 - 100% infill for rigidness. Print mount lying down, so that the flashlight mount faces up(if flashlight was inserted it would point up).</p> <p>This is tested and found out to hold the flashlight really well.</p> <p>Updates:</p> <ul> <li>26.10.2017 co-worker noticed that the support structure between mount points was a see-through kind of thing. Noticed a missing join operation in fusion 360 and fixed it in v3.2. V3.1 fastener works with 3.2 same way as before.</li> </ul> Category: Sport & Outdoors