Geeetech I3 Pro C Low Profile Top Mounted Dual Spool Holder Assembly

prusaprinters

This is a low profile, top mounted, dual spool mount for the Geeetech I3 Pro C acrylic framed printer. Use of this spool holder design requires the display to be relocated as the center support arm attaches dead center of the default display location. There are 4 pieces of this design, however, the Arm must be printed 3 times and both the Tube and EndCap must be printed twice. The Joiner that connects the two tubes in the center is to be printed only once. All parts of this model print without supports except for the single piece joiner. While the joiner does require support, it is quite easily removed. The Tube portion of this model is the same Tube I use for all my printer spool needs. It's a remix of budthedog's modified spool holder for the Creality CR-10. His original design is at: https://www.thingiverse.com/thing:2610784 The Tube is resized and specifically intended to work with jantzenday's Creality CR-10 Spool Adapter located at: https://www.thingiverse.com/thing:2387254 I use jantzenday's spool adapters, both large and small, depending on the spool holes inner diameter, for all my spools on all my printers. jantzenday's adapter centers flawlessly on every 1kg spool I've used, and rolls effortlessly on the tube with no flopping, jerking, or added vibration. Use of this model without jantzenday's spool adapters will likely result in clearance issues between the outer diameter of the spool and the printers frame as filament is unwound. Print Settings Printer: Geeetech I3 Pro Rafts: No Supports: No Resolution: .2 Infill: 20% Filament: Jinos 3D PLA Green Notes: All parts print as oriented in STL's without support except for the "joiner" piece, which does require supports for optimal results. How I Designed This =================== Category: 3D Printer Accessories