Geeetech i3 Pro B LCD holder

thingiverse

This is a modified version of the original Prusa LCD holder for Geeetech i3 Pro B (acrylic). The original Prusa has its LCD mounted on the front of the printer using two rods, whereas the i3 Pro B has it mounted on top. I relocated the LCD to the front and altered the holder to fit onto two layers of 8mm acrylic there. * The LCD supports (A and B) have been redesigned to accommodate the i3 Pro B. * The LCD cover and knob are identical to the original Prusa, found at https://github.com/prusa3d/Original-Prusa-i3/tree/MK2/Printed-Parts/stl. * The LCD cable holders have been resized to fit the threaded rod used by Geeetech (mine on i3 has a 9.5mm outside diameter, while the original Prusa uses 10mm rods). The assembly process is identical to the original - http://manual.prusa3d.com/Guide/6.+LCD+assembly/300. It's essential to note that the rotary encoder and reset button on the i3 are too long; you'll need to trim the reset button by about 5mm and the encoder rod by around 7mm so it fits within the LCD cover. Double-check your measurements before cutting, as the length may vary depending on which Chinese clone you have.