Geeetech A30 back frame braces - Z stabilizer - M8 M10

thingiverse

You can print them without supports. Print them like in the pic shown. I used 100% infill. Probably you can use lower infill. You can use the original lid and screws. So printing it is unnecessary. Z rods gap reduced significantly. With a BMG extruder, Z height is reduced to 320mm. This is due to the extruder screw with spring. I believe that with the original or other extruders, there is no such problem. There are STL files for M8 and M10 rods available. YOU NEED: - Two M8 or M10 threaded rods - 620mm long - Eight M8 or M10 bolts (I used 14 bolts for better locking) - Twelve M3x8 screws - Four M3x20 screws - Twelve M3 t-nuts