Geeetech A10 (v3) 60mm fan board cover

thingiverse

I decided to go with an 80mm fan instead and now I'm sharing it with you since I've already designed this. If you want the 80mm fan, head over here: https://www.thingiverse.com/thing:3419051 ----------------------------------------------------------------------------------------------------------------- I designed this specifically for the version 3 Geeetech A10 (the latest model) and also to provide clearance for TMC2208 stepper driver heat sinks and Y axis wheels. I printed the cover on the A10. **The cover was printed with these settings in Cura:** - 0.3mm layer height - 1.8mm walls - 1.8mm top and bottom - Supports at 75% from build plate - First layer at 20mm/s - The rest at 80mm/s (you may need to slow down to 60mm/s, if you still have stock hot end) - Except for supports at 40mm/s - 15% infill - 2 line skirt **I did not print the fan grill, but here are some recommended settings:** (if you print it, please post a make. This is the only reason I have this as work in progress) - 0.1mm layer height (0.2mm should be fine as well) - 1.2mm walls - 1.2mm top and bottom - First layer at 20mm/s - The rest at 80mm/s (you may need to slow down to 60mm/s, if you still have stock hot end) - No supports - 15% infill - 2 line skirt **You will need:** 4 x <a href="https://amzn.to/2EtFjYK" target="_blank">15mm M3 flat cap screws</a> 4 x <a href="https://amzn.to/2EtFjYK" target="_blank">M3 hex nuts</a> 6010 24 volt fan (I bought this <a href="https://amzn.to/2WUVyW0" target="_blank">one</a>) The cover attaches with the stock screws. I don't have a Z axis end stop, as I use a BLTouch, so this cover doesn't have the hole/slit for the Z axis end stop wire. If you really need one, let me know, and I may consider adding a second option with the hole in it. **Please note:** Links in BOM are for my Amazon affiliate account. I would highly appreciate it if you could use these links, if buying from Amazon. No pressure, but it would surely help me buy a cup of coffee. Or, if you prefer to drop me a cup of coffee via <a href="https://paypal.me/nordicblue" target="_blank">Paypal</a>