Geeetech A10 Power Supply Cover for 92 mm Fan (maybe Ender 3)

thingiverse

Geeetech A10 Cover for Power Supply to Mount a 92 mm Cooling Fan. This cover may also fit on an Ender 3, but you must check that beforehand. Warning: Opening a power supply is extremely hazardous. Do not attempt it unless you are certain of what you're doing. THERE ARE FIVE DIFFERENT OPTIONS: 1: PSU-Cover with threaded inserts and notch for LM2596 enclosure. 2: PSU-Cover with threaded inserts but without notch for LM2596 enclosure. 3: PSU-Cover without threaded inserts but with notch for LM2596 enclosure. 4: PSU-Cover without threaded inserts and without notch for LM2596 enclosure. 5: Cover for LM2596 enclosure notch. In case you've already printed the PSU-Cover with LM2596 notch, but no longer need to mount an LM2596 enclosure. PSU-COVER WITH THREADED INSERTS: This cover is designed to be mounted using threaded inserts. The mounting holes for the 92 mm Fan are also intended for threaded inserts. You can find more information about threaded inserts on the YouTube channel of CNC-Kitchen. PSU-COVER WITHOUT THREADED INSERTS: This cover has smaller screw holes, allowing you to screw directly into the plastic and omit attaching threaded inserts to mount this cover and fan. ADDITIONAL PARTS REQUIRED: 4 Screws M4x12mm (for the fan) 1 Cooling Fan 92 mm. I use a Noctua NF-A9 FLX, but any other 92 mm fan should fit too. OPTIONAL ADDITIONAL PARTS (dependent on the type of cover chosen): 4 Screws M3x10mm (for M2596 Buck Converter Enclosure) 4 Threaded inserts M4x8x6 (for the fan) 6 Threaded Inserts M3x6x5 1 LM2596 Buck Converter Enclosure https://www.thingiverse.com/thing:4096861 1 Buck Converter