Geared Maker Coin - Multi-Material

cults3d

Immediately when I saw this amazing maker coin for the Prusa Community's December print contest, I knew I had to rush and get it printed with my MMU2.0 right away. Boba Maker was kind enough to share the files so I could make that happen! This should be a very straightforward print as long as your multi-material printer is perfectly tuned! My fastest print-time was around 6.5 hours for two colors, while 13 hours were needed for all five colors. File Notes: Just to break down the way I have the files set up; - Each zip file has folders for 0.2mm, 0.35mm, and 0.5mm tolerances for that center body design. - Each zip file includes the high-infill mesh modifier. - Each zip file includes a .3mf file for the 0.35mm tolerance (with my MMU2.0 & filament settings) - The plane zip file has .3mf files for each tolerance. - My suggestion is to use the plane .3mf files as a template and swap out the center body you want to print with. This should make it easier to switch out the different designs without having to re-set up all of your settings. - I've included the high-infill mesh modifier.stl outside the zip files because Thingiverse wants at least one stl. Have fun & happy printing!