Gear for extruder 1:5
thingiverse
Reducor Based on UltiMate Medusa. Since a 40-tooth sprocket was not available, I generated an 80-tooth one and redesigned the casing. The small sprocket with 16 teeth is standard aluminum. Bearings were only available for an inner diameter of 5mm, which are MR105ZZ. They were installed. A dozen flange bearings were ordered so that it would be done. Sources are attached but I did not mess around with correctness or beauty of the code, wrote as is. So be careful, do not break your head there. In short, you need 2 MR105ZZ bearings, a UltiMate belt with 100 teeth, a shaft with 5mm and a sprocket with 16 teeth. And of course, a small pile of small screws and nuts. For version 1.1, you need 2 F695ZZ bearings.
With this file you will be able to print Gear for extruder 1:5 with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Gear for extruder 1:5.