GC9A01 Round OLED Case (Pico Pi Edition)

thingiverse

I made this GC9a01 Round OLED case around the pictured GC9a01 OLED on a larger PCB, as there are a couple of variations. This is a work in progress, however it is quick and very easy to print, I use 0.2mm for the facia and 0.4mm for everything else, which makes it a quick print. I print the facia directly onto glass for a nice shiny front. Also, with first layer at 0.2mm and 2x layers at 0.4mm, this makes a good 1mm (3 layer) front facia. (sweeten to taste) The display is securely clamped between the 'support' and the 'middle' section with M3 screws directly into the plastic. These screws go through the front section, then the clear plastic window, then the middle section and then finally screws into the support section. Edit at tinkerCAD https://www.tinkercad.com/things/j7rcA0biwKI FYI, I have used demo GC9A01 at https://github.com/todbot/CircuitPython_GC9A01_demos I use the following PINOUTs with PICO in this example tft0_clk = board.GP10 tft0_mosi = board.GP11 tft_L0_rst = board.GP17 tft_L0_dc = board.GP16 tft_L0_cs = board.GP18