Garuda HD Canopy

thingiverse

This is the high-definition canopy for the Garuda 200, 210, and Stretch. The canopy has a mounting system for HS1177-style FPV cameras at 30°, 45°, and 60° and features a 40° HD camera wedge that supports the GoPro Session or other standard form factor GoPros. Supported FPV Cameras: HS1177 / Foxeer XAT600M RunCam Swift RunCam Owl Plus This canopy does not fit the Foxeer Arrow, RunCam Swift 2, or RunCam Eagle as they lack the necessary nubs required to snap into the canopy. Supported Lenses Be sure to select the right file for the lens you will be using. Measure the outer diameter of your lens and select the correct file. GarudaHDCanopy_2.1Lens.stl - Supports 2.1mm and 2.5mm focal length lenses with an outer diameter of 17mm GarudaHDCanopy_2.8Lens.stl - Supports 2.8mm and some 2.1mm focal length lenses with an outer diameter of 14mm Required Hardware: 6x M3 black steel hex nut (DIN934, M: 2.4mm, S: 5.5mm) 6x M3 8mm black steel button head screw Where to Buy Garuda 210 kits are available at http://falconmultirotors.com/garudastretch.html Garuda Stretch kits are available at http://falconmultirotors.com/garudastretch.html Professionally printed canopies are available at https://www.phx-3d.com/product-page/garuda-hd-canopy License Like the sidebar says, Garuda Race Canopy is licensed under the Creative Commons - Attribution - NonCommercial - Share Alike license. Please refer to https://creativecommons.org/licenses/by-nc-sa/3.0/us/ for the full details. We're not lawyers, but here are some guidelines: NonCommercial — You can't sell printed canopies or make profit when printing for others as a favor. Don't put it up on your website and offer it for sale. Attribution — You need to credit Falcon Multirotors when sharing your remixes. Please upload your remixes to Thingiverse with a title that makes it clear what you changed, and cite this thing under the Remixes section so others can find your awesome modifications (which covers credit and linking to the license). We also appreciate it if you link to http://falconmultirotors.com as well! ShareAlike — This means you need distribute your remixes under the same license. Print Settings Printer Brand: FlashForge Printer: Creator Pro Rafts: No Supports: Yes Resolution: 0.200mm Infill: 100 Notes: Print using Sainsmart TPU, 100% infill, 2 perimeters. Post-Printing When removing supports, take care to remove any material that may be present in the nut holders as well as the camera nub holders.