GARMIN XERO C1 PRO CHRONOGRAPH CASE

thingiverse

1-31-24 UPDATE:After a few instances of people saying that parts don't fit, I decided to do a little digging and somehow a 0.5% scaling down occurred at some point. I'm not sure what happened, how it happened or where but I verified it by downloading the files and changing key measurements against the original SolidWorks Model and STL's that were generated from SolidWorks and that I originally printed and sure enough, on the files as downloaded from here, all checked dimension were right at 0.5% smaller than my original design.I also have added a "No Text" version of the lid because one person has had a problem with not being able to print it without the TextAll fills now are fine (have downloaded the new files that I reuploaded and all checked measurements are matching what they are supposed to be.Sorry for any inconvenience that this may have caused. Storage Case for the recently released Garmin XERO C1 PRO Chronograph.(disregard my less than crisp transition between letters and lid... I had unnecessary elephants foot amount set in the profile that I forgot to zero out before I printed the lid.)The lid can be printed plain with no letters or with the inlayed letters depending on if you split it into objects or not.While I'm not sure on other slicers but with Prusa Slicer, when the lid STL file is imported, it is in the "Plain" version and if you split it into objects, the letters are there and become printable geometry if you want to make them printable in a different color for those with multi material ability or that don't mind doing a few back and forth filament swaps during the first few layers of printing (what I did). Necessary extra hardware, M3 x 12mm Long screws (Qty., 4). A bit longer (like 15 to 20mm) will work too but I personally wouldn't go less than 12mm Long.