Gargoyle Pipe Cap
prusaprinters
<p>This is a remix of Misterdid's gargoyle on Thingiverse (https://www.thingiverse.com/thing:2471156), designed to snugly fit over an 18mm outside diameter pipe. It has a small hole in the bottom of the tube for a grub screw to further secure it to the pipe. Intended as a decorative way to keep wasps from nesting inside the pipe. :-)</p><h3>Print Settings</h3><p><strong>Printer Brand: </strong>SeeMeCNC</p><p><strong>Printer: </strong>Rostock MAX v2</p><p><strong>Rafts: </strong>No</p><p><strong>Supports: </strong>Yes</p><p><strong>Resolution: </strong>0.3 mm layer height, 0.6mm width</p><p><strong>Infill: </strong>10%</p><p> </p><p><strong>Notes:</strong></p><p>I did a fair amount of sculpting in Meshmixer to minimize overhangs when printed horizontally. Support is still needed up to the mouth, however.</p><p> </p><p> </p><p> </p><p>Category: Decor</p>
With this file you will be able to print Gargoyle Pipe Cap with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Gargoyle Pipe Cap.