Garden Sprinkler. Watering system for 1" thread and flexible pipe of 8mm inner diameter

thingiverse

A versatile watering system featuring a flexible pipe with an inner diameter of 8mm and an outer diameter of 11mm. The main component is the "Gewindestutzen" fitting, which screws onto a 1" thread. Next, place the "Schlauchstutzen" and filter "Sieb" into the Gewindestutzen. To assemble the Sieb and Siebdeckel, I used Revell plastic glue. Cut the pipe and insert the "Schlauchverbinder_mitAnschluß" into both parts of the pipe. This allows you to plug in different sprinklers according to your needs. If the Vapor-Sprinkler seems too complex, consider using the Strahlsprenkler instead. With the Strahlsprenkler2, I achieved excellent sprinkling results with a focused direction of the sprinkler. The "Einsatz_Regenrinne" serves as an alternative to the Schlauchstutzen/Gewindestutzen combination and provides an inlet for a round rain drain where the downpipe is mounted. To avoid clogging, place the Sieb_Einsatz_Regenrinne filter on top of the Einsatz_Regenrinne. For radiated sprinkling, use the Rundsprinkler, which features a 20mm long screw for wood mounting. The Rundsprinkler offers superior performance! Printed with the Creality CR-10 and designed using FreeCAD. Printing settings: PLA, 210 degrees Celsius. Support was used for printing the Schlauchstutzen, Schlauchverbinder_mit_Anschluss, and Vapor_Aufsatz components. Have fun experimenting with this system!