Garden Row / Plant Marker

thingiverse

This is a remix of the Garden Row Marker by jlauzon72 (https://www.thingiverse.com/thing:2555919). I set a new size and smoothed body. Use a label with 65mm width and 25mm height, so you can cut your own label or use normal labels for label makers. This thing has two 45° angled boarders at the marking place area, so if you use paper, it will be fixed by pushing in. The angled boarders also have a small area with 2mm each on top, where you can glue a transparent foil on. Wrap a foil around the marker, and it will work too. Scale as needed. The original height is about 19cm. Update 10.05.20: I added an extra (V3) marker from which you can better read the label (angle 0° - front, 45° - angled, and 90° - top). I tried to make it modular and lightweight so you can use the label model for every one of the two handles. One handle combines 0° and 90°, so you can switch as you like. For connectivity, I had to make an extra handle for the 45° view. All can be printed in a very short time and without supports. Warping shouldn't be an issue. If you experience it, just use a small brim or print the "closed version," for them, you will not need any brim or raft. Printed four at the same time without trouble (only skirt). So if your bed is leveled good, you are good to go with the open version. You can see it on the second picture. If you have questions or hints, you are welcome to leave me a comment. All versions printed in 0.15mm, 25% infill with normal speed settings. The label model needs about 39 minutes and the handle about 36 minutes with these more detailed settings. The models also do not consume too much filament, so you can print many of these. I also added three very heavy markers with the same angles, which need about three hours to print. For these, probably a good brim or raft is needed (I made a picture of the print with black PLA). They also don't need supports.