garden lamp led

thingiverse

Designed and manufactured garden lights for gardening. The result was a very soft and uniform light. Shade size D = 153mm, height 160mm Pad Size 100mm * 100mm The total height of the lamp is about 1 m, depending on the length of the pipe. From the purchase: Used LED lamps e14 Ceramic cartridge e14 PND water pipe with a diameter of 32 mm and a length of 850 mm The cartridge fits snugly into the lampshade. The pipe and body were connected using clear silicone sealant to be able to disassemble in the future, if necessary. I dug holes under the lights for the length of the shovel and poured cement mortar. He spent the wires using corrugated pipe, which he buried securely underground. For printing I used a nozzle 0.4. To print a white lampshade, I used the vase printing mode with a line width of 0.8 nozzle 0.4, but I had to reset the speed to 10-15mm/s, it turned out to be a fairly strong lampshade. For other parts, the number of wall lines is 3. The lid and base were painted with gray paint, but it was possible not to paint because the gray petg used has a natural finish. 5.stl lamp file did not check, may need correction. I printed 7.stl in vase mode.