Garbage Container

thingiverse

### Trash container model A very simple trash container design with a lid, designed specially for a special kid. Model suitable kids (and adults) who like (or are obsessed) with trash containers, garbage trucks e.t.c. ### Necessary parts for assembly: 1 x Container (3 design variants available) 1 x Lid (3 design variants available) 2 x Hinge 2 x Hinge_lock ### Assembly: ##### Option A 1.. Insert Hinges from inside of the container in the designed slots and slide them down in the slots as low as possible; 2.. Insert Hinge_locks from the outside and press them into the open slot; 3.. Stretch the Lid legs over the hinges one side at a time, press firmly so the Hinges pass trough Lid legs all the way; 4.. Marvel at Your new model. ##### Option B If using hard filament that is not very flexible or is brittle (for example PLA) that makes it hard to stretch the lid legs over the hinges: 1.. Insert one Hinge from inside of the container in the designed slots and DO NOT slide them down in the slots; 2.. Attach Hinge_lock from outside on the Hinge (make sure not to put it in the container slot); 3.. Attach Lid leg, by pressing the hinge trough Lid leg; 4.. Repeat steps 1. trough 3. for other side; 5.. Slide the whole assembly down into the Container slot as far as it will go; 6.. Rotate Hinge_locks so they match the openings and press them into the open slot; 7.. Enjoy. #### Available design variants: ##### Containers (bottom part) V0 - container design with original owners embossed logo; V1 - container design with empty frame for custom logo; V2 - container design without logo. ##### Lids (upper part) V0 - plain lid (without openings); V1 - lid with two circular openings; V2 - lid with square opening.