Gamecube Case for Raspberry Pi 4 Model B (RPI4B)

prusaprinters

<p>This is a remix of <a href="https://www.myminifactory.com/object/3d-print-gamecube-pi-classic-45314">Sparrows89's Gamecube Pi Classic</a> and <a href="https://www.thingiverse.com/thing:4735302">TheJeffChen's Logo Dunk Corner Stand</a>.</p><p>I've previously remixed this case for the RPI3B and decided that I wanted to make it for my RPI4B, too - and while remodeling it to fit the 4B, I also fixed a lot of mistakes that I made on the 3B version. Some of the changes include:</p><ul><li>thinner walls: The case requires roughly 50% less material and print time now. The walls on the original model were waaaaay too thick</li><li>more vent holes: I put some more holes under the PCB and on the back of the case for better ventilation. Also, the holes on the sides now better match the original model</li><li>added the little "feet" on the front</li><li>added the little curves on the sides</li><li>added the asymmetric frame on the back</li><li>moved the insert and power button up to better match the original Gamecube's appearance (they seemed a bit too low to me on the original model...?)</li><li>made a new connection for the handle that properly snaps in place now</li><li>made the front piece more rounded to better match the original Gamecube's</li><li>added the logo to the top insert because I thought the blank one looks a bit bland. Btw: the logo's a tight fit - you may have to carefully hammer it into the insert's indent&nbsp;</li></ul><p>... and I think that's it? I'm really proud of how much I've learned since making my first case, and I hope I'll continue to learn :)</p>