Game Roy Advance Keyboard Case

prusaprinters

<p>This is a simple case for the both halves of the <a href="https://keystonecaps.store/?product=game-roy-advance-left-side-kit">Game Roy ADVANCE keyboard</a>.</p><p>This case is meant to be used <i>without </i>the bottom plate and works with the included screws. I have included 2 sets of files:</p><ol><li>Has a thinner bottom, which means the reset switch sticks out by 1mm. I used rubber feet to raise the case up as well as give it traction (which I highly recommend). The feet give enough height that you won't accidentally press the button</li><li>Has a thicker bottom such that the reset button is recessed. Screw holes are also recessed so you can still use the included ones without having to use rubber feet. <strong>I haven't printed this one out</strong>, so let me know if there's anything off about it</li></ol><p>I printed with PETG at 25% infill, but you can increase or decrease the infill percent as you like. I recommend a 0.2 layer height.</p><p>To assemble, simply remove the bottom FR4 plate from the keyboard, place the board in the case, and screw in the screws from the bottom into the standoffs.</p>