Galaxy S7/S5 Loud Speaker

thingiverse

Loud Speaker Design for both Samsung Galaxy S5 and S7 This design works with other phones too but it was specifically designed for these two models. I have not had the chance to print this yet so I am unsure if there are any issues with it. All walls were made with 1.2mm thickness, and ceilings are all filleted to make printing easier - you shouldn't need any support material for this design. Print Settings Printer: Sunhokey Prusa i3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.3z or less is recommended for fast print speed, but 0.1z can be used for a nice finish on the outer edges. Infill: 20% minimum is required, anything above 30% is unnecessary. Notes: Prints use 70g or less of filament and don't need supports. I recommend using 0.3z for fast print speed, but if you want a nicer finish, try decreasing to 0.1z and printing at 30mm/s on the outer edges.