Galaxy S5 Hard Case (Revised)

thingiverse

A Hard Case Design Meant to Fit Samsung Galaxy S5.\nI Create This Base for Making Designer Cases for a Samsung Galaxy S5 Phone. I Print My Cases at 0.1 mm Layer Thickness, Shell 0.8, Bottom/ Top 0.8 mm Thick, With Supports in Use (ABS or PLA)\nThe Designer Samples Created Using This Model as the Base Are Also Included.\nUpdates:\n02/04/2014 - Moved the Power and Volume Button Slots So They Are More Centered on the Buttons. I Made the Depth of the Case a Bit Shorter (from 11 mm to 10.95 mm). A Test Print STL File Is Included, Allowing You to Check the Fit Without Wasting Material. The Older .STL Files Can Be Found in the Zip Archive.\n17/01/2014 - Uploaded Two Additional Cases Based on This Base Case, Also Plain and Hex Patterned with Exposed Sides, Top, and Bottom for Those Who Prefer a Minimalist-Type Case, Giving Total Access to Power and Volume Buttons and Removing Interfering Top Edges That May Cause Swiping Issues.\n06/14/2016 - Some People Have Been Asking Me for the CAD File of This Case. I Uploaded It for Those Who Prefer CAD Files Over STLs for Their Own Modifications. It Is an Inventor File (.ipt)\n01/15/2017 - Uploading s5 rev4-3_bumper.stl as Requested\n Instructions: I Print Cases at 0.1 mm Layer Thickness, Shell 0.8, Bottom/ Top 0.8 mm Thick. I Use Default Infill (20%) or You Can Increase As Desired. I Apply Supports for the On/off/Volume Button Slots.