G-Made GS-01 (4 Link) - Chassis Mounted Servo w/Pan

pinshape

This is a Chassis Mounted Servo (CMS) solution for your G-Made GS-01 - 4 Link Chassis. This particular design has been confirmed to work seamlessly with both the Komodo (Stock) and Sawback (After Conversion to 4 Link). Hardware Required: 2 x 3x14mm, 1 x 3x18mm, 1 x 3x6mm (The remaining hardware is reused directly from the kit. The drag link and push rod will be securely fastened on top of the steering arms. The push rod must be installed on the driver's side of the axle. Attach the servo brackets using the body mount post screws. First, attach the driver's side of the servo ears. The Pan Mount will be positioned in front of the servo ears, and the servo mount will go behind the ears. To complete this setup, remove the upper link from the driver's side of the chassis. This link will now serve as your pan link. It is recommended that you replace your servo push rod (bend it flat) with a flat rod or one featuring an stepped bend for optimal performance. This setup will not work in conjunction with the winch mount due to interference with the servo arm. A modified winch mount is currently under development to address this issue.