G 1 1/2 union fitting to 38mm (1 1/2'') hose connector

prusaprinters

<p>Use the .3mf files if possible, as the “union fitting nut G 1 1-2.3MF” contains a modifyer to have 100% infill in the critical section of the part. If you print from the stl, make sure the shoulder that holds the hose connector is printed with 100% infill.</p><p>Print each part separately. Best to print this from PC. A brim might be usefull.</p><p>I Only testet the part with a low pressure submersible pump. Be carefull when using it with high pressure like from a waterpipe.<br>Print the gasket from flexible filament or use a standard gasket.</p><p>The hose connector has reinforcing ribs on the inside, so it won't break easy even when there is some force applied to the hose.</p><p>Print settings</p><p>union fitting nut G 1 1-2.3MF:<br>0.1mm layer hight<br>3 perimieter<br>20% infill</p><p>hose connector 1 1-2'' = 38mm.3MF<br>0.2mm layer hight<br>100% infill</p><p>Solidworks and .step files are included, so you can adjust the part to your needs if necessary.&nbsp;</p>