Futurama Planet Express Ship MMU Parts

prusaprinters

<p>Split up specific stls for printing with different colors in case you have an MMU or equivalent.</p><ul><li>Teal bits</li><li>Green bits</li><li>Gray bits</li><li>Black bits</li><li>Red bits</li><li>Blue bits</li></ul><p>I printed at 150% so the tail logo comes out nicely [at .2mm layer height]. But because of that it won't fit in a MK3S in the originally vertical orientation. Instead, I split it horizontally below the red line. I printed with auto supports from bed, but some things (like the tail logo even) seem fine without.</p><p>Ship.Top has 6 colors, but the red is only used on the bottom section. So make sure you swap out your red filament for blue [window] filament after those layers finish. You don't necessarily have to M600; you will have lots of time to get that done. Or do something similar.</p><p>Some parts are kinda jank since I had to reduce the mesh in F360, but it works.</p><p>The specific teal filament I used is Polymaker PolyTerra PLA - Forrest Green</p><p>&nbsp;</p><p>Original model by ChaosCoreTech</p>