FuriBee F03 AIO Mini FPV câmera mount for Furibee F36, JJRC H36 or Eachine E010 Tiny Whoop mini drones

thingiverse

I designed this support in Solid Works specifically for the FuriBee F03 AIO Mini FPV Camera. This camera mount fits perfectly on the F36 FuriBee, Eachine E010, or JJRC H36 drone models that come without an FPV camera. The two plates of the Furibee F03 camera form a sandwich, and no glue is needed to secure it in place. I created this support with a 15-degree tilt for the camera. To print this support, you will need the STL and Gcode files, which are available for download. You will only need to purchase two screws to assemble the support, as one screw comes included with the drone. I designed this support using ABS material, but it can also be printed with PLA; however, you may need to adjust the temperature settings. There are two versions of the support: REV1 and REV2. REV1 has a smaller head diameter on the screws and a higher base for the camera sandwich. REV2 has an increased head diameter on the screws and a lower base for the camera sandwich. You can see the differences in the pictures provided to better understand the design. My printing tests were conducted using a 0.4 mm nozzle and 0.8 mm shell thickness. This project is only compatible with the FuriBee F03 AIO Mini FPV camera model. The recommended print settings are a nozzle temperature of 230 degrees Celsius and a bed temperature of 105 degrees Celsius. I hope this design helps everyone in need of an FPV camera support for their drone.