Funda para Hotend Argento - Hotend Argento Sock.

thingiverse

It requires four m3 screws to assemble this product. The process involves spraying a debinder inside it and then injecting high-temperature silicone using a silicone gun. You can also use it manually, but be prepared for your hands to get messy in the process. To do so, take all the parts and thoroughly grease them with lithium grease or a proper debinder, or floor wax. Then apply a generous amount of silicone everywhere, making sure not to leave any air holes. Assemble these parts and screw them together tightly using m3 screws and nuts. Next, insert an m5 bolt into the hole at the top and secure it to the block. Leave this in place until you disassemble the product. This will significantly reduce your drying time by about 10 hours. Once assembled, let it dry for 10-12 hours to ensure complete curing. Afterward, disassemble it by striking it from the bottom with a hammer and some 12mm diameter objects found within the central support. Your product is now ready for use.