FUNCTIONAL THRUST REVERSER - TRENT 900

cults3d

Functional thrust reversers for the High Bypass Engine Nacelle. https://cults3d.com/en/3d-model/gadget/high-bypass-engine-nacelle These will directly replace the existing non-functioning reversers. They are manually operated and are a nice addition to the high bypass jet engine model. They are modeled after the reversers on the inboard Trent 900 engines used on the A380. While they are perfect addition to the complete jet engine model, they are also an interesting functional demonstration model all by themselves. The Trent 900 does not use chevroned cowls. However, due to numerous requests, a chevroned version has been included. The chevroned version should be considered bonus content only since it is not true to scale. Also, as mentioned in the 3D printing settings below, the chevroned cowls should be considered VERY difficult to 3D print. The reverser cowls with the straight trailing edge will be quite easy to print. The straight reverser cowls are more scale like in appearance and are much easier to print. Even for a novice. Free documentation in PNG format available here: https://cults3d.com/en/3d-model/gadget/functional-thrust-reverser-documentation (Note the documentation in the paid download is in high quality PDF format. There is no need to download the free PNG documentation after downloading the paid version unless you can’t open PDF files.) Assembly video: https://youtu.be/ixjZDbUbsxo Refer to TN1-017_FUNCTIONAL_THRUST_REVERSER_ASSY.pdf for the reverser BOM. TN1-018_FULL_BOM.xlsx has the complete BOM for the full nacelle with the core engine and gearmotor included. Refer to TN1-015_FUNCTIONAL_THRUST_REVERSER_RH_ASSY.pdf and TN1-016_FUNCTIONAL_THRUST_REVERSER_LH_ASSY.pdf for assembly details. Includes: Chevroned** and straight translating cowls Additional split parts for smaller printers STEP files for all reverser parts The largest of these parts will fit inside 200mm wide x 200mm deep x 185mm high bed. (240mm Dia x 182mm high delta.) Split parts will fit inside 125mm wide x 120mm deep x 185mm high bed. (175mm Dia x 182mm high delta.) ********* Revised 08-11-2020 ********* Added chevroned translating cowls. ** Added split parts for smaller printers ********* Revised 01-19-2024 ********* Added K&S part numbers to prop rods, slide pins and hinge pins See TN1-018_Revisions_V6.txt for details